Understanding Flexible PCB Gerber Files: Layers and Manufacturing Data


When we receive a flexible PCB project from customer, we need to check the manufacturing data. A typical file package may contain several Gerber files, drill data, mechanical drawings, and other technical documents.
For engineers who regularly handle these files, identifying each layer may seem straightforward. However, file names are not always consistent, and different customers may use different naming conventions. More importantly, not every layer represents the same type of manufacturing information.
Let's briefly talk about the common layers in flexible PCB gerber files, and what each of them is used for.
Common Layers in Flexible PCB Gerber Files
The number of files varies depending on the circuit structure and manufacturing requirements. A simple single-sided flexible PCB may need only a few layers, while a multilayer design with coverlay and several stiffeners will require more manufacturing data.
The following are eight common layer types.
1. Copper Layers
Copper layers define the conductive patterns. They include traces, pads, and other copper features required for electrical connections.
Depending on the circuit structure, the files may include: Top Copper, Bottom Copper, Inner Layer 1, Inner Layer 2, etc.
Multilayer circuits contain more inner copper layers. The copper data also needs to correspond to the correct layer sequence. For example, the top and bottom copper patterns must be identified correctly before further manufacturing operations.
2. Surface Protection Layers
Both coverlay and solder mask ink are used to protect copper traces and provide electrical insulation on flexible PCBs. However, they differ in material composition and manufacturing processes. Depending on the product requirements, an FPC may use either one or, in some cases, both.
Coverlay
Coverlay is widely used to protect copper traces on flexible circuits. It typically consists of a polyimide film with an adhesive layer.
In many FPC projects, customers provide Gerber files showing only the coverlay openings rather than the complete coverlay film outline. These openings indicate where copper pads, contact areas, or other specified features need to remain exposed, while the remaining areas are covered by the film.
The corresponding data may be named top and bottom coverlay opening
Some customers use Solder Mask naming conventions for coverlay opening data. Customers usually provide Gerber data showing the required coverlay openings. During CAM processing, engineers need to confirm the intended image polarity and determine whether the data represents the opening areas or the coverlay coverage areas.
Solder Mask Ink
Some flexible PCBs use solder mask ink, such as liquid photoimageable solder mask (LPI). The solder mask data defines the areas where the ink is applied and the openings required for soldering pads or other exposed contacts.
Typical file names are top solder mask and bottom solder mask
Although coverlay and solder mask ink serve similar protective functions, they are different materials and require different manufacturing processes. Their corresponding data should be identified separately.

3. Silkscreen Layers
Silkscreen layers contain printed information on the circuit surface. This may include component references, polarity marks, product numbers, revision codes, and other identification details.
Common file names include Top Silkscreen, Bottom Silkscreen, Top Legend, Bottom Legend.
Not every flexible PCB requires silkscreen printing. For some products, the available printing area is limited, while others do not need printed identification at all.
4. Board Outline and Profile Layers
The outline layer defines the finished flex PCB shape. It may include the external board boundary, internal cutouts, slots, and other mechanical profiles.
Typical layer names are board outline, profile and mechanical layer.
The outline data is used to determine the finished board size and cutting boundaries. We need to check that the file contains a complete and clearly defined profile. Sometimes the outline is made up of multiple line segments, or several overlapping contours are included in the same file.
Non-plated holes may also be defined in separate drill data rather than directly in the outline layer.
5. Stiffener Layers
Stiffeners are added to selected areas of a flexible PCB to provide additional mechanical support. Their locations and shapes are usually defined in separate manufacturing layers or mechanical drawings.
Typical file names include PI stiffener, FR4 stiffener, SUS stiffener, top stiffener and bottom stiffener.
The stiffener data should clearly indicate the attachment area. Material type and thickness also need to be confirmed through the fabrication drawing or other technical specifications.
6. Adhesive Layers
Some flexible PCBs require pressure-sensitive adhesive (PSA) or double-sided tape for attachment to other components or product housings. In these cases, a separate adhesive layer may be included in the manufacturing data to define the tape's shape, position, and coverage area.
Depending on the project, this information may be provided as a dedicated Gerber file, a mechanical layer, or a separate drawing. The data should clearly show where the adhesive is applied and which areas need to remain uncovered.
7. NC Drill Files
Drill files define the coordinates, diameters, and types of holes required for manufacturing, including plated through holes (PTH), non-plated through holes (NPTH), blind vias, and buried vias.
Drill data is commonly supplied in Excellon format. However, a standard Excellon file mainly contains hole coordinates and tool information, without specifying the connected copper layers.
For multilayer FPCs with blind or buried vias, each drill file must be clearly associated with the stack-up, including the start and end layers. For example, a blind via may connect L1 to L2, while a buried via may connect L2 to L3.
A stack-up drawing or drilling specification is therefore necessary to clarify these layer relationships and avoid confusion during manufacturing.
8. Drill Drawing
Drill drawing is different from NC drill file. The NC drill file provides digital coordinates and hole sizes for the drilling equipment. A drill drawing, on the other hand, presents hole info in a visual engineering format.
It usually includes hole position, diameter, symbols, quantity, Tolerances.
This drawing is mainly used for engineering review and production reference. It allows engineers and inspectors to check hole specifications without having to interpret the raw drill data directly.

Gerber Layers vs. Physical Stack-Up
Here, it can be quite confusing: The number of Gerber files doesn’t represent the number of physical layers in a flex PCB.
Flexible PCB gerber files and other manufacturing files describe different types of production information. The physical stack-up describes how the actual materials are arranged. When we evaluate a substrate project, we need to consider these two matters separately.
Why Correct Layer Identification Matters
In actual manufacturing, the challenge is not simply opening the files. We also need to confirm that each file represents the intended manufacturing information.
Several issues can occur when layer identification is incorrect:
A coverlay opening file is mistaken for a solder mask file.
Top and bottom copper files are assigned to the wrong positions.
Stiffener data is confused with the board outline.
Drill data does not match the hole information in the drawing.
Different file revisions are mixed within the same project.
File naming conventions can vary between customers and design software. For example, a copper layer may be named Top Copper, F.Cu, or GTL. Similarly, some customers use Mechanical Layer for information other than the actual board profile.
For this reason, CAM engineers need to review the actual data, compare related files, and refer to the fabrication drawing when something is unclear.
Conclusion
In the production files of the flexible boards, there are not only copper patterns. Features such as opening of the coverlay, stiffener positions, drilling, and the board shape are also necessary production information.
The number of files required for each flexible circuit board project is not fixed. What specific materials are needed depends on the PCB structure and production requirements.
At our factory, after receiving the customer's design files, we must first understand the purpose of each file before converting them into production materials. This step is particularly crucial.





Comments